Hood PPF Cost: Partial Hood vs Full Hood Film and Edge Lines
Hood-only paint protection film typically costs about $300 to $700 on a standard sedan in 2026, with a partial hood strip at the low end and a full hood with wrapped edges at the high end. Long hoods, truck hoods and premium film push past that range.
The bigger decision is partial versus full. A partial hood covers the leading 18 to 24 inches, where most chips land, and leaves a visible film edge across the hood. A full hood covers the whole panel and wraps the edges, so there is no line to see. Below is how the two compare, where the edge lines sit and when a full front package is the better buy.
Instant price range for your exact vehicle, then offers from studios near you. Free, no account needed.
Partial hood vs full hood
A partial hood is a strip of film along the front of the hood. Gilroy Blackout and Rapid Window Tinting both describe it as the leading 18 to 24 inches, and it is the hood portion of a typical partial front package. It covers the part of the hood that faces oncoming debris most directly.
A full hood covers the entire panel, with the film wrapped around the front edge and, where possible, the sides and back edge. Gilroy Blackout describes its full hood coverage as wrapped to the back edge, which is what removes the line partway up the hood.
Hood-only jobs are less common than packages, and many shops quote them on request rather than listing them. Expect the shop to quote by the panel and the film.
| Option | What it covers | Typical price | Film line |
|---|---|---|---|
| Partial hood | Leading 18 to 24 inches | About $300 to $500 | Visible line across the hood |
| Full hood | Entire hood, edges wrapped | About $500 to $700 | No line on the hood face |
| Partial front package | Bumper, partial hood, fender tips, mirrors | $900 to $1,500 | Line on hood and fenders |
| Full front package | Full hood, fenders, bumper, mirrors | $1,800 to $3,000 | No hood or fender line |
Hood-only and partial front prices overlap more than most buyers expect. Get both quoted.
What sets the price of hood film
Size is the first factor. A compact sedan hood takes much less film than a full-size truck hood, and SUVs and trucks typically run 20 to 40 percent higher than sedans across PPF work. Hoods on long-nosed sports cars and trucks can push a full hood above $700.
Shape and features are the second. Hood scoops, vents, washer nozzles, badges and sharp creases all take extra labor to work around. Wrapping the edges, rather than cutting the film flush on top, also adds time, and on some cars it means removing trim.
Film is the third. Premium self-healing films with 10-year warranties, such as XPEL Ultimate Plus, cost more than budget films, and matte or colored film costs more again. Labor is still most of the price on a single panel, so a cheaper film saves less than you might think.
Where the edge lines sit
On a partial hood, the line sits across the hood where the film ends, usually 18 to 24 inches back. Rapid Window Tinting notes that this visible line can bother owners of show cars. The film is clear, but its edge typically collects dirt and wax over time and can show as a faint stripe, especially on dark paint.
On a full hood, the only edges are at the panel's own edges. If they are wrapped, the film tucks under the hood lip and there is no visible line on the top surface. If they are cut flush, you can see a thin line close to the panel gap. Gilroy Blackout says full front coverage eliminates the partial hood edge line problem entirely.
Edge quality matters more on a hood than almost anywhere else, since it is the most visible panel on the car. PPF Edge Wrapping Explained: Why Installers Tuck the Film covers wrapped versus cut edges.
- ◆Partial hood: one line across the hood, usually 18 to 24 inches back
- ◆Full hood, wrapped: no line on the visible surface
- ◆Full hood, cut: thin lines near the panel gaps
- ◆Fenders left bare: chips where the fender meets the hood
Is hood-only film worth it?
Hood-only film makes sense in a few cases: a car that already has a filmed bumper, a hood that was just repainted and needs protecting, or an owner who mostly worries about chips on a long, flat hood. Gilroy Blackout ranks the front bumper as the highest-frequency impact zone and the hood as very high, so the hood is a reasonable single panel to protect.
For most cars, though, hood-only leaves the front bumper bare, and the bumper is where chips land first. A partial front package costs $900 to $1,500 and covers the bumper plus the front of the hood, fender tips and mirrors, so it usually delivers more protection for a modest step up. If the line on a partial hood would bother you, full front at $1,800 to $3,000 covers the full hood and fenders. Partial Front vs Full Front PPF: Coverage, Cost and Which to Pick compares the two, and Bumper PPF Cost: Front Bumper Film Prices and Why Bumpers Chip covers bumper-only pricing.
Getting an accurate hood quote
Ask for the coverage in inches for a partial hood, whether a full hood includes wrapped edges on all four sides, which film brand and line is quoted, and whether the price includes any paint correction. Chips already on the hood will show through the film, so ask about touch-up first; PPF Over Rock Chips: Touch Up First, and What Film Hides explains the options.
Compare at least two quotes for the same coverage. The instant quote on Coateau lists local studios with their public Google ratings and the film brands they are certified to install.
Instant price range for your exact vehicle, then offers from studios near you. Free, no account needed.
Frequently asked questions
How much does PPF on just the hood cost?
Typically about $300 to $700 on a standard sedan in 2026, with a partial hood strip at the low end and a full hood with wrapped edges at the high end. Trucks and long hoods cost more.
How far up the hood does partial PPF go?
Usually 18 to 24 inches from the leading edge, which leaves a visible film edge across the hood.
Is full hood PPF worth it over partial?
If a visible line would bother you or you drive a lot of highway miles, yes. Chips can land anywhere on the hood at highway speed.
Can you see the line on partial hood PPF?
Usually, yes, especially up close and on dark paint. Full hood coverage with wrapped edges avoids it.