---
title: "How to Clean Exhaust Tips: Chrome, Stainless, Black and Carbon"
description: "Clean exhaust tips cold: degrease the soot, then polish stainless or chrome with a metal polish. Black, ceramic and carbon tips get only soap and water."
type: guide
service: detailing
publishAt: "2026-11-14T17:27:14.000Z"
canonical: "https://coateau.com/guides/how-to-clean-exhaust-tips"
sources:
  - label: "RealTruck, Borla Stainless Steel Exhaust Cleaner product page"
    url: "https://realtruck.com/p/borla-stainless-steel-exhaust-cleaner"
  - label: "AZ Pro Performance, Borla Exhaust Cleaner and Polish 8 oz listing"
    url: "https://azproperformance.com/products/borla-exhaust-cleaner-polish-8oz-bottle"
---

# How to Clean Exhaust Tips: Chrome, Stainless, Black and Carbon

To clean exhaust tips, wait until they are cold, wash off loose dirt with car soap, use a degreaser or all-purpose cleaner and a brush on the soot inside the tip, rinse and dry, then polish polished stainless or bright chrome tips with a metal polish made for them. Black chrome, black ceramic-coated and carbon fiber tips are different: AZ Pro Performance's listing for Borla's stainless polish says it is not for those finishes and recommends hot water and a microfiber cloth instead.

The biggest mistakes are polishing the wrong finish and working on hot metal. Identify the tip material first, because a product that brings polished stainless back to a mirror can strip a black coating or haze a carbon clear coat in one pass.

## Key facts

- **Borla's Exhaust Cleaner and Polish is formulated for T-304 stainless and bright chrome-style tips**; it lists at $26.99 for 8 oz
- **Not for black chrome, black coated, black ceramic-coated or carbon fiber tips**, per AZ Pro Performance's listing of the Borla polish
- **Hot water and a microfiber cloth** is the recommended clean for black and carbon tips in AZ Pro Performance's Borla listing
- **Soot sits inside the tip**, so a degreaser and a small brush do more than polish for most dirty tips
- **Always work on cold tips**; heat bakes product onto the metal and can burn you

## Identify your tip finish first

Most factory and aftermarket tips are one of five finishes. A magnet test helps: 304 stainless is usually weakly magnetic or not at all, and chrome-plated mild steel is strongly magnetic. Carbon fiber is obvious from its weave. Black tips can be painted, powder coated, black chrome or ceramic coated, and all of them should be treated as coated surfaces.

If a tip looks like plastic trim with a chrome-look ring, it may not be a tip at all. Many modern cars have a fake bumper diffuser with a plastic or plated surround and the real pipe hidden behind it. Treat those like plated plastic trim, not metal: no metal polish, as /guides/how-to-clean-chrome explains.

_Exhaust tip cleaning by finish_

| Finish | Routine clean | Polish? | Avoid |
| --- | --- | --- | --- |
| Polished stainless (often T-304) | Soap, degreaser on soot | Yes, a stainless or exhaust polish | Steel wool on mirror finishes |
| Bright chrome plating | Soap, degreaser on soot | Yes, a chrome-safe polish, lightly | Aggressive compounds that wear through plating |
| Black chrome, black ceramic or black coated | Hot water, soap, microfiber | No | Metal polish, abrasive pads |
| Carbon fiber | Hot water, soap, microfiber | Only a paint-safe finishing polish if hazed | Metal polish, solvents on the clear coat |
| Titanium (often blued or burnt) | Soap and a soft cloth | Usually no; the heat color is the look | Abrasive polishes that remove the coloring |

## Step by step for stainless and chrome tips

Work after the car has sat for a while, ideally before a wash so you can rinse everything off with the body. Wear gloves; exhaust soot is oily and stains skin and towels.

- Confirm the tips are cold to the touch, inside and out.
- Rinse loose dirt, then wash the outside with car shampoo and a dedicated wheel or tip mitt.
- Spray an all-purpose cleaner or degreaser inside the tip, let it dwell briefly, and scrub with a small wheel or tip brush.
- Rinse thoroughly and dry the tip completely so water spots do not etch the polished surface.
- Apply a small amount of metal polish made for stainless or chrome to a microfiber applicator and work it in short passes.
- Buff off residue with a clean microfiber towel; repeat on stubborn heat discoloration rather than pressing harder.
- Optionally protect the tip with a heat-rated coating or sealant, covered in /guides/ceramic-coating-on-chrome-and-exhaust-tips.

> Soot is most of the dirt. Degrease inside the tip before you reach for polish.

## Black, ceramic-coated and carbon fiber tips

These finishes are a coating over metal or a resin over carbon weave, so the goal is cleaning without abrasion. AZ Pro Performance's listing for Borla's Exhaust Cleaner and Polish says it is not intended for black-chrome tips, black coated tips, black ceramic-coated tips or carbon fiber tips, and suggests cleaning those with hot water and a microfiber cloth. That is a good rule for any brand.

Use car shampoo or a diluted all-purpose cleaner on a soft cloth, rinse and dry. For soot inside the tip, a soft brush and degreaser is fine on most black ceramic and powder coats, but test a small area first. Carbon fiber tips have a clear coat that behaves like paint. If it hazes, a paint-safe finishing polish by hand can help; once the clear coat yellows or cracks from heat, cleaning will not fix it.

## Products: what to use and what to skip

A dedicated stainless polish is the easiest route for polished tips. Borla's version is formulated for T-304 stainless and bright chrome-style tips and lists at $26.99 for an 8 oz bottle. General metal polishes work too, but read the label. Some chrome polishes are not meant for stainless or aluminum, which is why the chrome cleaning guide lists that restriction separately.

Skip oven cleaner, wheel acid and household abrasive powders. They can stain stainless, attack plating and strip coatings. Keep steel wool and scouring pads away from mirror-polished and coated tips, since they leave scratches that need machine polishing to remove.

- Use: car shampoo, all-purpose cleaner or degreaser, soft tip brush, microfiber towels
- Use on polished stainless and chrome only: an exhaust or stainless metal polish
- Skip: oven cleaner, acid wheel cleaners, abrasive powders
- Skip on coated, black and carbon tips: any metal polish or abrasive pad

## How often, and when it is beyond cleaning

A quick wipe inside the tip on every wash keeps soot from building up, and a polish every few months is typically enough on stainless. Diesels, direct-injection engines and cars that idle a lot need more frequent degreasing.

Deep pitting, flaking chrome plating, or rust under the plating will not clean out. Neither will heavy blue or gold heat discoloration on some stainless tips, which polish can reduce but not always remove. At that point a replacement tip often costs less than the time spent trying to restore it.

## Frequently asked questions

**Q: What is the best thing to clean exhaust tips with?**
A: A degreaser and small brush for the soot, then a stainless or chrome metal polish on polished tips. Black, ceramic and carbon tips only need hot water, soap and microfiber.

**Q: Can I use metal polish on black exhaust tips?**
A: No. AZ Pro Performance's listing for Borla's exhaust polish says it is not for black chrome, black coated or black ceramic-coated tips, and abrasive polish can wear through the finish.

**Q: How do I get black soot off exhaust tips?**
A: Spray a degreaser or all-purpose cleaner inside the cold tip, let it dwell briefly, scrub with a tip brush and rinse. Repeat rather than scrubbing harder.

**Q: Can I ceramic coat exhaust tips?**
A: Yes, with a product rated for the heat. The guide on coating chrome and exhaust tips compares heat ratings.

**Q: Can I use steel wool on exhaust tips?**
A: Keep steel wool and scouring pads off mirror-polished, chrome, coated and carbon tips, since they scratch. On a heavily neglected brushed stainless tip, test any abrasive on a hidden spot first.

**Q: Why do my exhaust tips turn black so fast?**
A: Soot from combustion coats the inside of the tip, and some engines, short trips and long idling produce more of it. A quick degrease on every wash keeps it from baking on.

## Sources

- [RealTruck, Borla Stainless Steel Exhaust Cleaner product page](https://realtruck.com/p/borla-stainless-steel-exhaust-cleaner)
- [AZ Pro Performance, Borla Exhaust Cleaner and Polish 8 oz listing](https://azproperformance.com/products/borla-exhaust-cleaner-polish-8oz-bottle)
