---
title: "Dyed Window Tint: What It Is, How Long It Lasts and What It Costs"
description: "Dyed tint is the cheapest film: it darkens glass and blocks UV but rejects the least heat. Spec numbers, lifespan and cost vs carbon and ceramic in 2026."
type: guide
service: window-tint
publishAt: "2026-11-16T22:01:33.000Z"
canonical: "https://coateau.com/guides/dyed-window-tint"
sources:
  - label: "LLumar automotive window film performance data (ATC, CTX, IRX)"
    url: "https://llumar.com/content/dam/eastman/performance-films/llumar/nar/documents/english/auto/llumar-automotive-window-film-performance-data.pdf"
  - label: "SunTek automotive window film specifications (Carbon, CXP)"
    url: "https://suntekfilms.com/content/dam/eastman/performance-films/suntek-films/documents/film-specifications/automotive-window-film-specifications.pdf"
  - label: "XPEL warranty information (PRIME window film terms)"
    url: "https://www.xpel.com/warranty-information"
  - label: "XPEL PRIME USA specification sheet (R0523, PRIME CS Black)"
    url: "https://www.xpel.com/web-assets/downloads/XPEL_PRIME_spec_sheet_USA_Rev0523.pdf"
  - label: "UPPF, why window tint turns purple (dyed film durability table)"
    url: "https://www.uppf-usa.com/blogs/post/why-does-window-tint-turn-purple"
  - label: "586 Tint Factory, cost of window tinting, PPF and ceramic coating (2025)"
    url: "https://www.586tintfactory.com/2025/04/15/breaking-down-the-cost-of-window-tinting-ppf-and-ceramic-coating"
---

# Dyed Window Tint: What It Is, How Long It Lasts and What It Costs

Dyed window tint is a polyester film colored with dye, and it is the cheapest automotive tint you can buy: it darkens the glass, cuts glare and blocks UV, but it rejects the least heat of any common film type. It typically costs at or below the price of carbon film, which runs $250 to $400 on a standard sedan in 2026.

The catch is longevity and heat. Older and budget dyed films can fade and turn purple within a few years, while newer color-stable dyed films from major brands carry lifetime warranties against discoloration. Below are real spec-sheet numbers for dyed film next to carbon and ceramic, how long each lasts and when dyed is still a reasonable buy.

## Key facts

- **LLumar ATC 35, a color-stable dyed film, lists 38% VLT and 35% total solar energy rejection**, versus 48% for LLumar's CTX 35 ceramic, on LLumar's performance data sheet.
- **Dyed film's infrared rejection is low**: ATC lists 22% IR energy rejection at every shade, against 60% for LLumar's IRX ceramic.
- **Dyed films still block UV**: LLumar lists more than 99% UV protection for ATC, and XPEL lists 99% for its PRIME CS dyed line.
- **UPPF's comparison table puts standard dyed tint at 3 to 4 years** of durability before fading, versus 10 years for the premium ceramic films it lists.
- **XPEL's PRIME warranty, which includes CS, covers discoloration and fading for the life of the vehicle**, with online registration required within 30 days.

## What dyed tint is and how it works

Window film starts as a clear polyester base with an adhesive on one side and a scratch-resistant coat on the other. Dyed film gets its color from dye in or on that polyester. The dye absorbs visible light, which is what makes the glass darker and cuts glare, and the film's UV inhibitors block ultraviolet light. What dye does poorly is stop infrared, the part of sunlight you feel as heat on your arm.

Not all dyed film is the same. LLumar's performance data sheet labels its ATC series a color-stable dyed window tint, and XPEL backs its PRIME CS film with the same life-of-vehicle warranty against discoloration and fading that covers its ceramic lines. Budget no-name dyed rolls are the ones most associated with bubbling and purple windows, and they rarely come with a manufacturer warranty you can register.

## Dyed vs carbon vs ceramic on the spec sheet

The table below uses roughly 35% shades from manufacturer data sheets. LLumar and SunTek report on 6mm clear glass under NFRC guidelines, so their numbers line up with each other. Notice how close the dyed and plain carbon films are on total heat, and how far ceramic pulls ahead.

XPEL measures differently, on 3mm glass using EN 410 methods, and reports IR at a single 1025nm wavelength. For reference, its dyed PRIME CS Black 35 lists 34% VLT, 36% TSER and 12% IR rejection at 1025nm, so treat it as a separate scale rather than a row in the table. The spec sheet guide explains why those methods do not compare directly.

_Roughly 35% shades, manufacturer data on 6mm clear glass (NFRC)_

| Film | Type | VLT | Total solar energy rejected | IR energy rejected (IRER) |
| --- | --- | --- | --- | --- |
| LLumar ATC 35 | Color-stable dyed | 38% | 35% | 22% |
| SunTek Carbon 35 | Carbon | 36% | 38% | Not listed |
| SunTek CXP 35 | Carbon (CarbonXP) | 33% | 53% | 55% |
| LLumar CTX 35 | Ceramic | 37% | 48% | 48% |
| LLumar IRX 35 | Nano-ceramic | 39% | 54% | 60% |

> Dyed film blocks UV about as well as ceramic. The gap is heat, and it shows most on a long sunny commute.

## How long dyed tint lasts

Dye breaks down under UV and heat. UPPF explains that as the dyes degrade, the remaining color shifts toward purple, and that the effect is most pronounced in dyed films without color-stable or metallic components. Its comparison table lists standard dyed tint at 3 to 4 years of durability. Cheap, non-color-stable dyed film commonly starts to look purple or faded within about 3 to 5 years in sunny climates, often with bubbling as the adhesive fails.

Color-stable dyed films from the large brands are a different product. XPEL's warranty page covers its PRIME films, including CS, against discoloration, fading, bubbling, peeling, cracking and delamination for the life of the vehicle, as long as the original owner registers online within 30 days of installation. If you buy dyed film, buy a named, color-stable line from a shop that registers the warranty for you.

- Purple or brown tint is the classic sign of degraded dye
- Bubbling usually means the adhesive is failing, not just the color
- A named film line and a registered warranty are what separate long-lived dyed film from the cheap kind

## What dyed tint costs in 2026

Coateau's catalog does not carry a separate dyed tier, and dyed film generally prices at or below the carbon band. One tint shop's 2025 price breakdown lists dyed film at $100 to $250 for a sedan, versus $250 to $400 for carbon or hybrid film. Expect the low end from budget shops using unbranded film and the higher end for a color-stable branded line such as LLumar ATC or XPEL PRIME CS.

Ceramic tint runs $450 to $700 on a standard sedan in 2026, and SUVs run about 20% higher and large SUVs and trucks about 40% higher at every tier. Removing failed dyed film later adds cost, so a cheap install that fades in four years can end up costing more than carbon film installed once.

_Typical full side-and-rear tint prices, standard sedan, 2026_

| Film type | Sedan price | Heat rejection | Fade risk |
| --- | --- | --- | --- |
| Dyed (budget) | Typically $100 to $250 | Lowest | High |
| Dyed (color-stable brand) | At or below $250 to $400 | Low | Low, warrantied |
| Carbon | $250 to $400 | Moderate | Low |
| Ceramic | $450 to $700 | Highest | Low |

## When dyed tint is still a sensible buy

Dyed film makes sense when the goal is looks, privacy and UV protection rather than heat. A car that is garaged, driven mostly in the evening or kept in a mild climate gets most of the benefit for the least money. It is also a fair choice on an older car you plan to sell in a few years, as long as it is a color-stable branded film.

It is a poor fit for a daily commuter in the Sun Belt, a car with a large rear windshield or glass roof, or anyone who bought tint mainly to keep the cabin cooler. In those cases carbon tint costs only somewhat more and lasts better, and ceramic tint is the film that actually changes how hot the car feels. The instant quote on Coateau lists local prices for each film type.

## Frequently asked questions

**Q: Is dyed window tint bad?**
A: No, but it rejects the least heat of the common film types. Color-stable dyed film from a major brand is a reasonable budget choice; cheap unbranded dyed film is the kind that turns purple.

**Q: Does dyed tint block UV?**
A: Yes. LLumar lists more than 99% UV protection for its ATC dyed film, and XPEL lists 99% for PRIME CS.

**Q: Why does dyed tint turn purple?**
A: UV and heat break down the dyes unevenly, and the colors left behind read as purple. Color-stable films are designed to resist this.

**Q: Is dyed tint cheaper than carbon?**
A: Usually. Dyed film prices at or below the $250 to $400 carbon band on a sedan, with budget dyed installs often under $250.

## Sources

- [LLumar automotive window film performance data (ATC, CTX, IRX)](https://llumar.com/content/dam/eastman/performance-films/llumar/nar/documents/english/auto/llumar-automotive-window-film-performance-data.pdf)
- [SunTek automotive window film specifications (Carbon, CXP)](https://suntekfilms.com/content/dam/eastman/performance-films/suntek-films/documents/film-specifications/automotive-window-film-specifications.pdf)
- [XPEL warranty information (PRIME window film terms)](https://www.xpel.com/warranty-information)
- [XPEL PRIME USA specification sheet (R0523, PRIME CS Black)](https://www.xpel.com/web-assets/downloads/XPEL_PRIME_spec_sheet_USA_Rev0523.pdf)
- [UPPF, why window tint turns purple (dyed film durability table)](https://www.uppf-usa.com/blogs/post/why-does-window-tint-turn-purple)
- [586 Tint Factory, cost of window tinting, PPF and ceramic coating (2025)](https://www.586tintfactory.com/2025/04/15/breaking-down-the-cost-of-window-tinting-ppf-and-ceramic-coating)
